How To
Cutting Ezarri Mosaic Tiles Without Costly Mistakes
May
In this blog, we’ll guide you through the process of cutting Ezarri mosaic tiles using both a grinder and an electric cutter. To begin with, our detailed video, along with accompanying images, demonstrates how easy it is to cut these tiles as well as the tools you’ll need. Moreover, you’ll find step-by-step instructions that ensure you achieve the best results.
Tools for Cutting Ezarri Mosaic Tiles
There are two main tools for cutting Ezarri mosaic tiles:
- Grinder
- Electric Cutter
For both tools, it’s crucial to choose the right disc:
Grinder:
- Diamond Cutting Disc (∅115mm) – Ref. MTEN 3
- Grinding Disc – Ref. H009
Electric Cutter:
- Diamond Disc for Hard Material
Cutting Ezarri Mosaic Tiles with a Grinder
- Fit the Cutting Disc:
- Use the Diamond Cutting Disc – Ref. MTEN 3.
- Always wear safety equipment: glasses, gloves, and earplugs.
- Mark the Cut:
- Clearly mark the area where you want to cut to ensure precision.
- Cut the Tile:
- On a work table with a slot, cut the Ezarri mosaic tile (formats: 25mm, 36mm, or 50mm). Importantly, grind the mosaic from the side, not from above. As shown in the video, this method is demonstrated clearly.
Cutting Ezarri Mosaic Tiles with an Electric Cutter
- Follow Similar Steps as the Grinder:
- Wear safety equipment.
- Mark the material.
- Proceed with cutting.
Smoothing Ezarri Mosaic Tiles
- Fit the Grinding Disc:
- Use the Grinding Disc – Ref. H009.
- Always wear safety equipment: glasses, gloves, and earplugs.
- Mark the Area to be Removed:
- Clearly mark the section that you need to smooth.
- Grind the Tile:
- Support the grinder against the table and grind the pieces until you achieve the desired result.
Cutting Special Pieces: Corners and Coves
For special pieces like corners and coves, we recommend paring them instead of cutting. Indeed, this method is safer and ultimately yields optimal results.
- Fit the Grinding Disc:
- Use the Grinding Disc – Ref. H009.
- Always wear safety equipment: glasses, gloves, and earplugs.
- Mark the Area to be Removed:
- Clearly mark the section that needs to be pared.
- Pare the Pieces:
- Support the grinder against the table and pare the pieces until the desired result is obtained.
For a detailed visual guide, first, check out our video and images that illustrate these steps. Additionally, by following these guidelines, you will ultimately ensure that you achieve professional results with your Ezarri mosaic tile.
Here are the 4 tools you will need to properly install your pool tile:
Cutting Mosaic Disc | Pliers | Notched Trowel: 6 mm | Rubber Float
